CZ TS 2 springs

Springs set how your CZ TS 2 feels and cycles: the trigger pull, the hammer strike, the reset and how the slide moves under recoil. Lighter springs let you tune the pistol to your ammunition, which matters in a single action competition pistol. You can choose springs from Eemann Tech, Toni System, Zendl, KMR and DPM.

Spring kits

• Eemann Tech competition spring kit for the TS 2 and CZ 75 TS: 11 lb recoil spring, 9 lb main spring and competition trigger, firing pin and sear springs.
• Eemann Tech springs kit: trigger group and recoil springs in one kit, for the Shadow 2, TS 2, CZ 75B and SP-01.

Main springs and recoil springs

The main spring sets the hammer strike. A lighter one gives a lighter pull, but test ignition with your primers before a match. You can choose main springs from Eemann Tech and Toni System, and the Eemann Tech calibration pack with 7, 8, 9, 10 and 13 lb springs, colour coded. Toni System recommends a weaker firing pin spring together with its weaker main spring.

The recoil spring sets how the slide cycles. You can choose recoil springs from Eemann Tech, from 7 to 13 lb, and from Toni System, and the Eemann Tech calibration pack with 9, 10, 11 and 12 lb springs.

Trigger group springs

• Trigger springs: the Eemann Tech direct replacement for the TS 2 and CZ 75 TS, a -15 % competition spring, a +10 % spring for a more positive reset, and the Zendl lighter spring for the TS 2, CZ TS and TSO.
• Sear springs: standard from Zendl and Eemann Tech, -10 % from Eemann Tech.
• Trigger bar springs: standard or -15 %.
• Firing pin springs: standard or light from Eemann Tech and weaker from Toni System.

Other springs

You can also get extractor springs for 9x19 and 9x21, an Eemann Tech ejector spring set for 9x19 and .40 S&W, a magazine spring for 9x19 and .40 S&W, magazine catch release springs, and safety detent plunger springs and the right safety detent plunger from KMR.

Recoil reduction

DPM recoil reduction systems for the TS 2, TS 2 Orange, CZ 75 Tactical Sports and TS Czechmate are in CZ TS 2 recoil reduction springs.

Springs for other CZ pistols are in Springs. For all TS 2 parts, see CZ TS 2 accessories.

Frequently asked questions

Is there a complete spring kit for the TS 2?

Yes. The Eemann Tech competition spring kit for the TS 2 and CZ 75 TS has the recoil, main, trigger, firing pin and sear springs.

Will a lighter main spring cause misfires?

Yes, it can with hard primers. Test ignition with your ammunition before a match.

Is there a magazine spring for .40 S&W?

Yes. The Eemann Tech magazine spring for the TS 2 and CZ 75 TS fits 9x19 and .40 S&W magazines.