CZ 75 SP-01 Shadow springs

Springs set how your CZ 75 SP-01 Shadow feels and cycles: the trigger pull, the hammer strike, the reset and how the slide moves under recoil. Lighter springs let you tune the pistol to your ammunition, and complete kits turn a factory pistol into a competition setup without permanent changes. You can choose springs from Eemann Tech, Toni System, Zendl, KMR and DPM.

Kits

• Eemann Tech SP-01 Shadow competition kit: drop-in parts for a lighter trigger, about 2.94 kg (6.5 lb) in double action and 1.13 kg (2.5 lb) in single action.
• Eemann Tech ultimate competition kit: recoil springs from 9 to 12 lb and main springs from 7 to 10 lb, colour coded, trigger, firing pin and sear springs, an extended firing pin, a short reset disconnector, recoil buffers, a trigger pin and a hammer strut pin.
• Eemann Tech Competition spring kit: 11 lb recoil spring, 9 lb main spring and competition trigger, firing pin and sear springs.

Main springs and recoil springs

A lighter main spring gives a lighter pull, but test ignition with your primers. You can choose main springs from Eemann Tech and Toni System and the Eemann Tech calibration pack with 7 to 13 lb springs. Recoil springs come from Eemann Tech, 7 to 13 lb, and Toni System, with a calibration pack of 9 to 12 lb.

Trigger group springs

You can choose trigger springs that are standard, lighter, -15 % or +10 %, sear springs at standard or -10 %, trigger bar springs at standard or -15 %, and firing pin springs from Eemann Tech and Toni System.

Magazine springs

Eemann Tech makes magazine springs for the OEM 18 round magazine, the MEC-GAR 19 round magazine and the 16 round magazine.

For DPM recoil reduction systems, see CZ 75 SP-01 Shadow recoil reduction springs. Springs for other CZ pistols are in Springs. For all SP-01 Shadow parts, see CZ 75 SP-01 Shadow accessories.

Frequently asked questions

How light is the trigger with the SP-01 Shadow competition kit?

About 2.94 kg (6.5 lb) in double action and 1.13 kg (2.5 lb) in single action.

Is there a magazine spring for the 18 round magazine?

Yes. Eemann Tech makes a spring for the OEM 18 round magazine of the SP-01 Shadow.

Do I need a gunsmith for the kits?

No for the SP-01 Shadow competition kit. Its parts are drop-in, without permanent modifications.