CZ P-10C accessories

Collections
CZ P-10, CZ P-07 & P-09 mag release spring pin| part #27

CZ P-10C accessories

(111 products)

The CZ P-10C is a compact striker fired pistol with a polymer frame. It belongs to the P-10 family together with the P-10F and P-10S, and most parts are shared between them. Here you find base pads, sights, red dot plates and mounts, springs, magwells, holsters and spare parts. You can choose original CZ parts and parts from Toni System, Eemann Tech, Ascalon Arms, DPM, LPA, Zendl, Manul, Angry Bear, EGW, KMR, Strike Industries, RH Holsters and Falco.

Accessories by category

Base pads

Base pads for the P-10 family come from CZ, Toni System, Ascalon Arms, Manul and Strike Industries and add from 0.5 to 5 rounds. The Ascalon Arms aluminium pad adds up to 4 rounds on the P-10C magazine. The P-10M has its own base pad.

Red dot

On the P-10C OR, the red dot sits on an Optics Ready plate in the slide cut. You can choose plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Holosun 509T and Vortex Razor footprints. The Holosun SCS P-10 fits the cut directly, without a plate. On a P-10C without the optic cut, a red dot mount from Zendl, KMR, EGW, Toni System or Outer Impact replaces the rear sight in its dovetail.

Sights

For the standard P-10 you can choose adjustable sights from CZ, LPA and Zendl and fixed sets from CZ and Angry Bear. For the Optics Ready P-10 you can choose CoWitness tall sights from CZ, Angry Bear, Night Fision and LPA, which let you see the iron sights through the red dot, and Angry Bear low sights for shooting without a red dot. Front sights are fixed with a screw.

Springs

For a lighter trigger pull, the Ascalon Arms striker spring sets it to about 1.6 kg, and the CJ Manufactory kit reduces it by about 0.25 or 0.5 kg. With the Eemann Tech P-10 competition spring kit the trigger safety may not function, so use it only for sport shooting. Ascalon Arms heavy return springs make the trigger reset easier to feel.

Grip, magwell and weight

For the grip you can add Manul Nexum grip tape or the Ascalon Arms comfort backstrap, which has a compartment for one spare 9x19 round. Magwells for the P-10C come from CZ and Toni System in aluminium. The size of the CZ magwell matches the size of the installed backstrap. Toni System makes frame mounts in aluminium or brass that add weight to the front of the frame and accept a Toni System thumb rest or Picatinny rail. For more weight under the barrel, Toni System makes a steel guide rod that replaces the factory polymer part.

Other parts

CZ makes an aluminium magazine release that is more comfortable than the factory part, coloured aluminium slide plugs, and a compensator with a 1/2 x 28 UNF thread made for the P-10C. Ascalon Arms makes the Highshelf extended and Slingshot slim slide stops for the 9x19 models. DPM makes a recoil reduction system for the P-10C. RH Holsters makes kydex holsters in IWB and OWB versions that work with an installed red dot.

Frequently asked questions

Can I put a red dot on my CZ P-10C?

Yes. On the P-10C OR you use an Optics Ready plate for the footprint of your red dot, or a Holosun SCS P-10 without a plate. On a P-10C without the optic cut, a red dot mount replaces the rear sight.

Do P-10C parts fit my P-10F or P-10S?

Many do. Base pads, most springs, Optics Ready plates and sights are shared in the P-10 family. Holsters, magwells and backstraps differ by size.

Can I make the trigger of my CZ P-10C lighter?

Yes. A lighter striker spring from Ascalon Arms or CJ Manufactory reduces the pull. Test the pistol carefully after the change, and keep in mind that some competition kits affect the trigger safety.
152
39